Professional shot blasting machine manufacturer, serving the world !

WhatsApp/WeChat

+86 15154227700

Made in China

ProductPRODUCT SHOW

A shot blasting machine manufacturer dedicated to the research, development, design, production, and operation of shot blasting machines

Foundry Equipment

Resin Sand Production Line|Automatic Resin‑Bonded Sand Reclamation Line

Time:2026-10-31Hits:2

Resin Sand Production Line Drawings

Resin Sand Production Line Drawings

Product Introduction:

The automatic resin sand production line is a complete set of sand‑processing equipment specially for foundry workshops. It is applicable for preparing furan resin‑bonded sand, alkaline phenolic resin sand, sodium silicate self‑hardening sand and other no‑bake sands. The whole system integrates used‑sand shakeout, crushing, magnetic separation, attrition reclamation, air classification, cooling, storage and automatic sand mixing to realize closed‑loop recycling of foundry sand。

Qingdao Huazhu Environmental Technology supplies standardized resin‑sand lines with capacities of 5t/h, 10t/h, 20t/h up to 100t/h. Custom layout and configuration are available according to customer’s casting output and workshop space. It is an ideal solution for both new‑foundry construction and old workshop technical retrofitting, bringing reliable performance, lower operating cost and full environmental compliance.

Resin Sand Production Line Project PhotosResin Sand Production Line Project Photos

Resin Sand Production Line Project PhotosResin Sand Production Line Project Photos

Core Advantages

  1. Full‑automatic PLC intelligent controlThe whole production line adopts PLC interlocked automatic operation for batching, sand mixing, sand conveying and used‑sand recycling. It supports independent manual debugging for each single unit. Operators can master daily operation after simple training; no full‑time attendant is required during continuous running。

  2. Stable sand quality for higher casting yieldPrecision metering system controls the proportion of new sand, reclaimed sand, resin and hardener. Consistent flowability and strength of prepared sand reduce casting defects such as blowholes, sand inclusions and dimensional deformation, improving finished‑casting rate significantly。

  3. High used‑sand reclamation rate & low material costComplete mechanical reclamation workflow handles shake‑out waste sand via crushing, magnetic separation, film stripping and air winnowing. Sand reclamation rate can reach above 95%. It greatly cuts consumption of fresh silica sand and solid‑waste discharge for your foundry.

  4. Easy maintenance & low failure rateThe core double‑arm continuous sand mixer adopts split‑open housing structure. Mixing blades are fully accessible for quick cleaning, inspection and replacement of wearing parts. Residual sand and residual liquid will not accumulate inside units, preventing blockages and extending equipment service life.

  5. Integrated dust‑removal for environmental compliancePulse bag‑house dust collectors are installed for all dust‑generating points including shakeout, crushing, reclamation and conveying. Workshop air stays clean and the emission meets local environmental‑protection standards.

    Resin Sand Mixer

Standard Models & Key Technical Data

5t/h Small‑size Resin‑Sand Reclamation Line‑ Suitable for foundries with annual casting output within 3000 tons ‑ Throughput: 5 t/h ‑ Sand reclamation rate: ≥95 % ‑ Sand film‑stripping rate: ≥25 % ‑ Outlet temperature of reclaimed sand: ≤40 ℃

10t/h Medium‑size Resin‑Sand Reclamation Line‑ For medium‑scale continuous casting production ‑ Throughput:10 t/h ‑ Surplus capacity supports multi‑station simultaneous molding work.

Working Process

Casting shakeout → Conveying & screening → Sand lump crushing → Double‑stage magnetic iron removal → Turbine‑type sand reclamation & film stripping → Air separation & fine‑powder removal → Sand cooling and storage → Proportioning & automatic sand mixing → Molding / core‑making. All processes run in mechanized closed‑loop circulation and avoid human‑caused parameter deviation.

esin Sand Production Line Process Flow

Application Scope

Widely used in iron casting, steel casting and precision casting sectors, including construction machinery parts, auto components, valves & pipes, mining machinery and machine‑tool castings. The system fits for old‑plant upgrading as well as new‑foundry overall planning.

Turn‑key Service Support

Qingdao Huazhu provides one‑stop turn‑key solutions: site survey, process design, customized manufacture, factory pre‑inspection, on‑site installation & commissioning, operator training and after‑sales support. We offer free workshop‑layout suggestion and equipment‑selection consultation. Spare‑parts inventory guarantees quick response for maintenance requests to keep your foundry production running smoothly.


Website:http://www.shotblastcn.com/html/Product/cp15/91.html